Why Does My House Smell Musty When I Turn on My Swamp Cooler?
If your home smells musty, moldy, or damp every time you turn on your swamp cooler, it’s easy to assume the cooler itself needs cleaning or maintenance. While dirty cooling pads, stagnant water, or neglected maintenance can certainly create unpleasant odors, they’re not the only possible causes.
In many New Mexico homes, the source of that musty smell may actually begin on the roof.
A roof leak around your swamp cooler can allow rainwater to enter areas that should remain completely dry. Over time, moisture can soak insulation, roof decking, ceiling materials, and even the ductwork that carries cooled air throughout your home. When the swamp cooler starts running, it pushes air through those damp areas and distributes musty odors—and potentially mold spores—into every room connected to the ventilation system.
Many homeowners are surprised to learn how closely their roofing system and evaporative cooler work together. Because most swamp coolers are installed directly on the roof, they require large roof penetrations, equipment curbs, flashing systems, duct openings, electrical connections, and water supply lines. Every one of these components must remain properly sealed to prevent water intrusion.
New Mexico’s climate can make these areas especially vulnerable over time. Intense ultraviolet (UV) exposure, dramatic temperature swings, seasonal monsoon storms, hail, high winds, and years of expansion and contraction gradually wear roofing materials and flashing around rooftop equipment. Even a small opening may allow water to enter the roof assembly long before a visible ceiling stain appears inside the home.
At Rocky Mountain Roofing Services, roof leaks around swamp coolers are a common issue encountered during residential roof inspections throughout Albuquerque, Santa Fe, and Central New Mexico. With more than 35 years of combined roofing experience, the company regularly investigates leaks caused by deteriorated flashing, failed sealants, aging roofing materials, and improper installations around evaporative coolers and other roof penetrations. Every inspection focuses on identifying the actual source of water intrusion so homeowners receive the right repair rather than a temporary fix.
In this article, you’ll learn why a musty smell often appears only when your swamp cooler is operating, how roof leaks can contribute to indoor air quality problems, what warning signs to watch for, and when it’s time to schedule a professional roof inspection.
Why Does the Smell Only Happen When the Swamp Cooler Runs?
One of the biggest clues that the problem may be related to your roof is when the odor appears.
If your home smells normal most of the day but develops a musty or moldy odor only after the swamp cooler starts running, the cooling system is often acting as the delivery system—not necessarily the source of the problem.
Swamp coolers move large volumes of outside air through rooftop ductwork before distributing that cooled air throughout your home. If moisture has entered the duct system because of a roof leak, that airflow can carry damp, stagnant odors into nearly every room connected to the ventilation system.
Think of it this way: if a sponge has been left damp inside a closed container, it may not produce a noticeable odor until air begins moving across it. The same principle applies to wet insulation, damp wood framing, or moisture inside ductwork. Once the swamp cooler’s blower starts operating, those odors become much more noticeable because they are circulated throughout the house.
Several roof-related conditions can create this situation, including:
- Water leaking around the swamp cooler roof curb
- Failed flashing surrounding the evaporative cooler
- Damaged roofing materials near the cooler
- Moisture entering duct penetrations
- Wet insulation surrounding the air drop
- Water collecting around rooftop equipment after monsoon storms
In Albuquerque and Santa Fe, many homes rely on evaporative cooling during the hottest months of the year. These systems may operate for hours each day during the summer, repeatedly circulating air through the same ductwork. If moisture is present, the musty odor often becomes stronger each time the cooler cycles on.
The smell itself doesn’t always indicate extensive mold growth. Sometimes the odor comes from damp insulation, wet wood, accumulated dust that has become moist, or stagnant water trapped around the roof penetration. Regardless of the exact source, recurring musty odors should never be ignored because they indicate that unwanted moisture is present somewhere within the roofing or ventilation system.
Can a Roof Leak Really Cause a Musty Smell?
Yes—it absolutely can.
Although many homeowners initially suspect their swamp cooler needs servicing, roof leaks are a frequently overlooked cause of musty indoor odors.
When rainwater enters around a leaking roof penetration, it doesn’t simply drip straight into the living space. Water often follows roof decking, framing members, insulation, and ductwork before becoming visible inside the home. During that time, building materials remain damp, creating ideal conditions for persistent musty odors.
Common areas where roof leaks may develop around a swamp cooler include:
- The metal roof curb supporting the cooler
- Flashing installed around the curb
- Roofing materials surrounding the equipment
- Fasteners and sealants that have deteriorated with age
- Openings where ductwork passes through the roof
- Pipe and electrical penetrations serving the cooler
These areas experience constant exposure to New Mexico’s harsh weather. Years of intense sunshine, seasonal monsoon rains, hailstorms, high winds, and repeated heating and cooling cycles can gradually weaken roofing materials and sealants. Even a small opening may allow water to enter during heavy rain while remaining virtually invisible during dry weather.
One of the challenges with roof leaks is that the source of the leak is often several feet—or even several yards—from where the odor or interior damage becomes noticeable. Water can travel along framing members or inside ductwork before finally collecting in insulation or ceiling materials.
For this reason, replacing cooler pads or cleaning the swamp cooler alone may not eliminate the smell if the underlying problem is water entering through the roof.
A professional roof inspection can determine whether the odor originates from a roof leak, deteriorated flashing, or another roofing issue, allowing the problem to be corrected before moisture causes more significant damage to your home and roofing system.
How Roof Leaks Around Swamp Coolers Develop
Most homeowners think of their swamp cooler and their roof as two separate systems. In reality, they work together every day.
Because an evaporative cooler sits directly on the roof, several openings must be created through the roofing system. These include the cooler curb, supply air duct, electrical connections, water supply line, and mounting hardware. Each penetration must be carefully waterproofed so rainwater stays outside where it belongs.
Over time, however, roofing materials naturally age.
In Albuquerque, Santa Fe, and throughout New Mexico, roofs endure some of the harshest weather conditions in the country. Intense ultraviolet (UV) radiation, high elevation, dramatic temperature swings, powerful winds, hailstorms, and seasonal monsoon rains all place continual stress on roofing materials.
As these materials expand and contract over thousands of heating and cooling cycles, sealants may dry out, flashing can loosen, fasteners may back out, and roofing materials can begin to deteriorate.
Eventually, even a small opening may allow rainwater to enter around the swamp cooler.
Because many of these openings are hidden beneath the cooler itself or beneath flashing components, homeowners often have no idea water has been entering the roof for months before symptoms appear inside the house.
Rather than dripping directly into a room, water frequently follows the path of least resistance, traveling across roof decking, framing members, insulation, and ductwork before finally becoming noticeable.
By the time a musty smell develops, moisture may have been present for quite some time.
Roof Curbs, Flashing, and Roof Penetrations
One of the most common locations for roof leaks around evaporative coolers is the roof curb.
A roof curb is the raised structure that supports the swamp cooler above the roof surface. It provides a stable mounting platform while allowing ductwork to pass into the home below.
To keep water out, roofing materials are carefully integrated with metal flashing installed around the curb.
When properly installed, this flashing directs rainwater away from the penetration.
However, several conditions can eventually compromise this waterproof barrier, including:
- Aging sealants
- Corroded flashing
- Improper installation
- Loose fasteners
- Storm damage
- Movement caused by repeated expansion and contraction
- Previous repairs that failed prematurely
Even a very small opening around the flashing can allow water to enter during a heavy rainstorm.
This is especially true during New Mexico’s summer monsoon season, when wind-driven rain can force water into places it normally would not reach.
In addition to the curb itself, other roof penetrations serving the swamp cooler require ongoing protection.
These include:
- Electrical conduit penetrations
- Water supply line penetrations
- Condensate-related openings
- Roof-mounted support brackets
- Duct transitions
Every penetration represents another location where flashing and sealants should be inspected periodically as part of routine roof maintenance.
How Moisture Enters Ductwork
One reason nasty musty odors become so noticeable when the swamp cooler runs is that roof leaks often occur immediately above the home’s main air distribution system.
The large supply duct connecting the swamp cooler to the home’s ceiling passes directly through the roof.
If water leaks around this opening, it may enter areas surrounding the duct before reaching the interior ceiling.
Moisture may then affect:
- Exterior duct insulation
- Interior duct insulation
- Sheet metal ductwork
- Air distribution boxes
- Ceiling cavities
- Surrounding framing
Even if water never drips directly into the duct itself, damp insulation surrounding the duct can produce persistent musty odors.
As the swamp cooler pushes thousands of cubic feet of air through the system every minute, those odors may be distributed throughout nearly the entire home.
Many homeowners mistakenly believe mold must actually be growing inside the ductwork itself.
While that is possible under certain conditions, the odor frequently originates from moisture affecting materials immediately adjacent to the ducts rather than inside the air passage.
Determining the exact source requires a careful inspection of both the roofing system and the surrounding building components.
Wet Insulation and Attic Moisture
Roof leaks rarely affect only one material.
Once water enters the roofing system, it often saturates insulation before becoming visible elsewhere.
Insulation acts much like a sponge.
Instead of allowing water to drain away quickly, it may retain moisture for extended periods, especially if the leak is small and occurs repeatedly during seasonal storms.
Wet insulation can contribute to several problems, including:
- Persistent musty odors
- Reduced energy efficiency
- Slower drying after rainfall
- Damage to surrounding materials
- Increased likelihood of biological growth on suitable surfaces
In homes with accessible attic spaces surrounding swamp cooler ductwork, moisture may also affect roof framing, ceiling joists, roof sheathing, and nearby building materials.
Because much of this damage remains hidden above the ceiling, homeowners often notice the odor long before they see water stains or visible deterioration.
This is one reason recurring musty smells should never be dismissed simply because no ceiling leak is visible.
Professional roof inspections frequently identify moisture problems before they become major structural repairs.
Why New Mexico’s Monsoon Season Makes the Problem Worse
New Mexico’s climate presents a unique combination of roofing challenges.
For much of the year, roofs experience extremely dry conditions with intense sunshine and high UV exposure. Then, during the summer monsoon season, heavy rain may fall in a very short period of time.
These sudden storms place tremendous stress on roofing systems.
If flashing around the swamp cooler has already begun deteriorating, wind-driven rain can quickly expose weaknesses that remained unnoticed during dry weather.
Additional local conditions include:
- High winds that loosen flashing over time
- Hailstorms that damage roofing materials
- Large daily temperature swings
- Freeze-thaw cycles in higher elevations
- Intense solar radiation that accelerates sealant aging
Together, these environmental factors gradually increase the likelihood of water intrusion around roof penetrations.
Many homeowners notice a pattern: the musty smell becomes strongest shortly after a monsoon storm, then gradually fades during extended dry weather—only to return after the next significant rainfall.
That recurring cycle is often an important clue that moisture is entering somewhere around the rooftop swamp cooler rather than originating inside the cooler itself.
At Rocky Mountain Roofing Services, roof inspections throughout Albuquerque, Santa Fe, Rio Rancho, and surrounding communities routinely focus on these vulnerable areas. By identifying deteriorated flashing, damaged roofing materials, and developing leaks early, many homeowners can avoid more extensive damage to their roofing system, insulation, ceilings, and indoor air quality while extending the life of their roof.
Indoor Air Quality and Health Concerns
A musty odor does not automatically prove that harmful mold is growing inside your home. However, it does indicate that moisture, damp materials, stagnant water, or biological growth may be present somewhere in or around the cooling system.
That deserves attention.
When a swamp cooler operates, it pulls outside air through wet cooling pads and pushes that air into the home. If the air passes through damp insulation, water-damaged framing, contaminated dust, or wet duct components, it may carry unpleasant odors and airborne particles throughout the living space.
People may react differently to poor indoor air quality. Some occupants may notice no physical effects, while others may experience irritation when exposed to damp or contaminated environments. Children, older adults, people with asthma, and individuals with allergies or respiratory sensitivities may be more affected.
A roofing contractor should not diagnose mold or make medical conclusions. The roofer’s role is to locate and correct water intrusion through the roof. When significant mold growth or contaminated building materials are suspected, an indoor environmental professional or qualified remediation contractor may also be needed.
The most important step is stopping the moisture source. Cleaning visible stains or replacing cooler pads may provide temporary improvement, but the odor can return if rainwater continues entering around the swamp cooler.
Warning Signs of a Swamp Cooler Roof Leak
A musty smell may be the first noticeable symptom, but it is rarely the only clue. Homeowners should look for other signs of moisture around the swamp cooler and the main air drop.
Common warning signs include:
- Musty or moldy odors that begin when the cooler turns on
- Stronger odors after a monsoon storm
- Water stains near ceiling vents
- Discoloration around the main air register
- Bubbling or peeling ceiling paint
- Soft or swollen drywall
- Damp insulation in the attic
- Rust on metal ductwork
- Water dripping from the cooler opening
- Cracked roofing materials around the unit
- Loose, corroded, or deteriorated flashing
- Repeated roof repairs around the same penetration
- Visible gaps in old sealant
- Ponding water near the swamp cooler
The timing of the odor can provide useful information. If it becomes stronger immediately after rain, the roof should be inspected. If the smell occurs throughout the cooling season regardless of weather, the cooler, drain pan, pads, water supply, ductwork, and roof penetration may all need evaluation.
Homeowners should not climb onto the roof to investigate unless they have the proper training and fall-protection equipment. Roof surfaces can be slippery, especially around evaporative coolers where water may be present.
How a Professional Roof Inspection Finds the Source
Finding a roof leak around a swamp cooler requires more than applying another layer of sealant.
Water often travels away from the original opening before it becomes visible inside the home. A ceiling stain or damp duct may be several feet from the actual roof defect. That is why professional leak detection focuses on the entire roof assembly around the equipment.
A roofing inspection may include:
Examining the Swamp Cooler Curb
The roofer checks the raised curb supporting the cooler for movement, corrosion, open joints, improper construction, and deterioration.
Inspecting Flashing
Flashing should direct water around the curb and onto the roof surface. The inspector looks for loose edges, gaps, punctures, corrosion, failed seams, and areas where roofing materials have separated.
Evaluating Sealants and Fasteners
Old sealants can crack, shrink, or lose adhesion under New Mexico’s intense sunlight. Fasteners may loosen or create small entry points for water.
Inspecting the Surrounding Roof
The problem may extend beyond the cooler itself. Cracked coatings, damaged membranes, split seams, deteriorated shingles, punctures, or ponding water nearby can direct moisture toward the penetration.
Checking Other Cooler Penetrations
Water lines, electrical conduits, support brackets, and duct transitions must also remain sealed. A small leak around one of these components may be mistaken for a curb-flashing problem.
Looking for Interior Moisture Evidence
When accessible, the inspection may include the attic, ceiling cavity, duct exterior, insulation, roof decking, and framing below the cooler.
Rocky Mountain Roofing Services provides roof inspections, leak detection, flashing repair, and roof-penetration repairs for residential and commercial properties throughout Albuquerque, Santa Fe, and Central New Mexico. The company’s inspection-first approach is designed to identify the cause of a leak before recommending repairs.
How Are Swamp Cooler Roof Leaks Repaired?
The correct repair depends on the roof type, the condition of the cooler curb, and the extent of the water damage.
Possible repairs include:
- Removing failed sealant and installing compatible roofing sealant
- Refastening or replacing loose flashing
- Rebuilding improperly installed curb flashing
- Repairing damaged roofing membrane
- Restoring cracked roof coatings
- Repairing foam roofing around the cooler
- Replacing deteriorated shingles near the penetration
- Sealing water-line and electrical penetrations
- Correcting drainage that directs water toward the cooler
- Replacing wet insulation
- Repairing damaged roof decking
- Replacing a deteriorated roof section when localized repair is no longer practical
Simply covering the area with roofing cement is not always a lasting solution. Temporary patching can hide the problem without correcting failed flashing, wet insulation, damaged decking, or poor drainage.
The repair materials must also be compatible with the existing roof. TPO, modified bitumen, spray polyurethane foam, roof coatings, asphalt shingles, and tile systems require different repair methods. Rocky Mountain Roofing Services installs and services multiple residential and commercial roofing systems commonly found throughout New Mexico.
Roof Repair or Broader Restoration?
| Condition | Likely Response |
| Small gap in otherwise sound flashing | Localized flashing repair |
| Failed sealant around a minor penetration | Remove and replace compatible sealant |
| Isolated membrane damage near the cooler | Professional membrane repair |
| Cracked foam or coating around the curb | Foam repair and compatible recoating |
| Wet insulation in a limited area | Remove and replace damaged materials |
| Repeated leaking around an improperly built curb | Rebuild curb and flashing assembly |
| Widespread roof deterioration | Consider roof restoration or replacement |
| Damaged decking or structural materials | Remove affected materials and complete repairs before reroofing |
A professional inspection should determine whether the roof can be repaired or whether a larger section needs restoration. Rocky Mountain Roofing Services emphasizes honest evaluations and extending the useful life of a roofing system whenever practical rather than automatically recommending replacement.
Frequently Asked Questions
Why does my swamp cooler smell musty even after I replace the pads?
The odor may be coming from wet insulation, damaged ductwork, stagnant water, or a roof leak around the cooler rather than the pads themselves.
Can a roof leak put mold inside my ducts?
A roof leak can introduce moisture into or around ductwork. Whether mold is present requires proper evaluation. The water source should be identified and repaired promptly.
Should I call an HVAC company or a roofer?
Contact an HVAC professional when the odor appears related to dirty pads, a contaminated reservoir, mechanical problems, or cooler maintenance. Contact a roofer when you see ceiling stains, damaged flashing, cracked roofing, storm-related symptoms, or odors that become worse after rain. In some cases, both trades may need to inspect the system.
Can wet insulation cause a musty smell?
Yes. Insulation can retain moisture and develop a persistent damp odor, especially when airflow from the swamp cooler passes nearby.
Will sealing around the cooler stop the smell?
It may stop additional water intrusion if the correct leak source is repaired. However, wet insulation, damaged drywall, or contaminated materials may still require drying, cleaning, or replacement.
How often should the roof around a swamp cooler be inspected?
The roof should generally be inspected at least once a year and after major hail, wind, or monsoon events. Rooftop equipment and penetrations deserve special attention because they are common leak locations.
Do Not Ignore a Musty Smell When the Cooler Runs
A musty or moldy odor that appears whenever your swamp cooler turns on is more than an inconvenience. It may be an early warning that moisture is entering around the roof curb, flashing, duct opening, water line, or another rooftop penetration.
The problem may begin with a small gap, but repeated water intrusion can damage insulation, ceilings, decking, framing, and the roofing system itself. It can also allow unpleasant odors to circulate throughout the home every time the cooler operates.
Early inspection gives homeowners the best opportunity to correct the leak before the damage spreads.
Schedule a Swamp Cooler Roof Leak Inspection
Rocky Mountain Roofing Services provides professional roof inspections, leak detection, flashing repairs, roof-penetration repairs, flat roof repairs, roof maintenance, and roof replacement services throughout Albuquerque, Santa Fe, Rio Rancho, Corrales, Bernalillo, Placitas, Los Lunas, Belen, Edgewood, and surrounding Central and Northern New Mexico communities.
With more than 35 years of combined roofing experience, the company understands how New Mexico’s intense UV exposure, high winds, hailstorms, monsoon rains, and temperature changes affect rooftop swamp coolers and the roofing materials surrounding them.
If your house smells musty whenever the swamp cooler runs, contact Rocky Mountain Roofing Services for an honest roof evaluation. A professional inspection can help determine whether water is entering through the roof and what repairs are needed to protect your home.
Rocky Mountain Roofing Services
100 Mountain Park Place, Suite A
Albuquerque, NM 87114
Phone: (505) 717-1925
How to Prevent Musty Smells and Roof Leaks Around Your Swamp Cooler
The best way to eliminate musty odors caused by roof leaks is to prevent water from entering the roofing system in the first place. While no roof lasts forever, regular inspections and routine maintenance can significantly reduce the likelihood of moisture intrusion around rooftop evaporative coolers.
Because swamp coolers remain exposed to New Mexico’s intense sun, heavy winds, seasonal monsoon rains, and occasional hailstorms, the roofing materials surrounding them often age faster than many homeowners realize.
A proactive maintenance program helps identify small issues before they become expensive repairs.
Homeowners should consider:
- Scheduling an annual professional roof inspection
- Inspecting the roof after major hailstorms or wind events
- Having flashing checked around rooftop equipment
- Repairing damaged roofing materials promptly
- Keeping roof drains and scuppers clear on flat roofs
- Replacing deteriorated sealants when necessary
- Addressing minor leaks before insulation becomes saturated
- Having swamp coolers professionally serviced before each cooling season
Routine maintenance costs far less than repairing water-damaged ceilings, insulation, roof decking, or structural framing.
Seasonal Roof Maintenance Tips for New Mexico Homeowners
Because New Mexico experiences distinct seasonal weather patterns, roofing systems should be inspected throughout the year—not only after a leak develops.
Spring
Before cooling season begins:
- Inspect the swamp cooler before startup.
- Check flashing around the roof curb.
- Inspect visible roofing materials for winter damage.
- Replace cracked sealants.
- Schedule preventative roof maintenance if needed.
Summer
During monsoon season:
- Watch for water stains after heavy rain.
- Pay attention to musty odors when the cooler starts.
- Inspect for standing water on flat roofs.
- Remove debris that may block roof drainage.
Fall
After the cooling season ends:
- Shut down and winterize the swamp cooler.
- Inspect the roof penetration before colder weather arrives.
- Remove accumulated debris.
- Schedule repairs before winter moisture arrives.
Winter
Even though the cooler is no longer operating:
- Inspect flashing after snow or freezing conditions.
- Look for evidence of previous leaks.
- Address roof repairs before spring arrives.
Regular seasonal inspections help extend both the roof’s lifespan and the life of the evaporative cooling system.
Common Mistakes Homeowners Make
When a musty smell develops, homeowners naturally want a quick solution.
Unfortunately, several common mistakes allow the underlying problem to continue.
Replacing the Cooler Pads Without Investigating the Roof
New pads may temporarily improve air quality, but they will not stop water entering through failed flashing or damaged roofing materials.
Ignoring the Smell Because There Is No Ceiling Leak
Many roof leaks remain hidden for months before visible interior damage appears.
Waiting until water stains develop often results in more extensive repairs.
Applying Roof Cement Everywhere
Smearing roofing cement over the suspected area rarely addresses the actual source of water intrusion.
Professional repairs identify why the roof is leaking before selecting the proper repair method.
Waiting Until the Next Rainstorm
Some homeowners postpone repairs because the leak seems minor.
Unfortunately, every rain event allows additional moisture into the roofing system, increasing the likelihood of damaged insulation, deteriorated decking, and larger repair costs.
Assuming Every Musty Odor Is Mold
Although mold is one possible cause, odors may also originate from damp insulation, wet framing, stagnant water, deteriorated roofing materials, or contaminated dust.
Proper inspection determines the actual source.
Why Professional Roof Inspections Matter
Roof leaks around swamp coolers are often deceptively difficult to locate.
Water rarely travels straight downward.
Instead, it may move:
- Along roof decking
- Around ductwork
- Across framing members
- Beneath roofing membranes
- Through insulation
- Around fasteners
- Along roof curbs
By the time water reaches the interior ceiling, the actual leak may be several feet away.
Professional roofing inspections combine experience with systematic evaluation of the entire roofing assembly to locate the true source of water intrusion.
Rather than treating only the symptom, experienced roofers identify the root cause.
That approach produces longer-lasting repairs while reducing the likelihood of recurring leaks.
Frequently Asked Questions
Can a swamp cooler leak damage my roof?
Yes.
Water escaping from the cooler or entering around deteriorated flashing can damage roofing materials, insulation, decking, and interior finishes if left uncorrected.
Does every musty smell mean mold is present?
No.
A musty odor simply indicates moisture or damp materials may be present.
The source could include wet insulation, roof leaks, stagnant water, deteriorated building materials, or biological growth.
Can flat roofs be more susceptible to swamp cooler leaks?
Flat roofs rely on carefully designed drainage systems.
When flashing fails or water ponds around rooftop equipment, leaks may become more likely.
Routine inspections are especially important for commercial buildings and residential flat roofs.
Will homeowners insurance cover a roof leak?
Coverage depends on the cause of the leak and the specific insurance policy.
Sudden storm-related damage may be covered, while deterioration caused by deferred maintenance often is not.
Property owners should review their policy and consult their insurance carrier regarding coverage.
Should I replace my roof if the swamp cooler leaks?
Not necessarily.
Many leaks can be repaired successfully if discovered early.
However, if the roof has reached the end of its useful life or extensive deterioration is present, replacement may provide the most cost-effective long-term solution.
A professional inspection can determine the most appropriate recommendation.
Protect Your Roof—and the Air Inside Your Home
Your swamp cooler should make your home more comfortable—not fill it with musty odors every time it starts running.
If you notice a persistent moldy smell whenever the cooler operates, don’t assume replacing the pads will solve the problem.
The source may be hidden above your ceiling, where a small roof leak has allowed moisture to enter around the swamp cooler for weeks—or even months.
Early repairs often prevent much larger problems involving insulation, roof decking, drywall, and interior finishes.
At Rocky Mountain Roofing Services, every roof inspection focuses on identifying the true source of water intrusion so repairs address the cause rather than simply covering up the symptoms.
With more than 35 years of combined roofing experience, Rocky Mountain Roofing Services proudly serves homeowners and commercial property owners throughout Albuquerque, Santa Fe, Rio Rancho, Corrales, Bernalillo, Placitas, Los Lunas, Belen, Edgewood, and communities across Central and Northern New Mexico.
Whether you suspect a roof leak around your swamp cooler, need flashing repairs, require a comprehensive roof inspection, or want honest guidance about your roofing system, the experienced team at Rocky Mountain Roofing Services is here to help.
Schedule your professional roof inspection today and stop small leaks before they become major repairs.
Rocky Mountain Roofing Services
100 Mountain Park Place, Suite A
Albuquerque, NM 87114
Phone: (505) 717-1925
Protect your roof. Protect your home. Protect your indoor air quality—with Rocky Mountain Roofing Services.